UFf225 capillary m fiber membrane babban kayan polymer ne, wanda ba zai sami canjin lokaci ba. Kayan PVDF da aka gyara, wanda aka karɓa akan wannan samfurin, yana da ƙimar ƙyalli mai kyau, kyawawan kaddarorin inji, kyakkyawan juriya na sinadarai da juriya mai gurɓatawa. MWCO shine 200K Dalton, membrane ID/OD shine 0.8mm/1.3mm, nau'in tacewa yana waje-in.
An tabbatar da wannan samfurin yana da tasirin tacewa a ƙasa bisa ga yanayin sabis na hanyoyin ruwa daban-daban:
Abun ciki | Tasiri |
SS, Barbashi> 1μm | Yawan Cire ≥ 99% |
SDI | ≤ 3 |
Bacteria, Virus | > 4 bugu |
Turbidity | <1NTU |
TOC | Yawan Cire: 0-25% |
* Ana samun bayanan sama a ƙarƙashin yanayin ciyarwar ruwa shine <25NTU.
Ma'aunin Fasaha:
Nau'in Tace | Waje-ciki |
Material Membrane | Gyaran PVDF |
MWCO | 200K Dalton |
Yankin Membrane | 60m2 |
Membrane ID/OD | 0.8mm / 1.3mm |
Girma | Φ225mm*1860mm |
Girman Mai Haɗi | DN50 |
Bayanan Aikace-aikace:
Ruwan Ruwa Mai Tsabta | 12,000L/H (0.15MPa, 25 ℃) |
Tsarin Flux | 40-120L/m2.hr (0.15MPa, 25 ℃) |
Nasihar Matsin Aiki | ≤ 0.2MPa |
Matsakaicin Matsi na Transmembrane | 0.15MPa |
Matsakaicin Matsi na Wanke Baya | 0.15MPa |
Girman Wanke Iska | 0.1-0.15N m3/m2.hr |
Hawan Wanke Iska | ≤ 0.1MPa |
Matsakaicin zafin Aiki | 45 ℃ |
Farashin PH | Aiki: 4-10; Wankewa: 2-12 |
Yanayin Aiki | Cross-flow ko Matattu-karshen |
Bukatun Ruwan Ciyarwa:
Kafin ciyar da ruwa, yakamata a saita tacewar tsaro <50 μm don hana toshewar manyan barbashi a cikin ɗanyen ruwa.
Turbidity | ≤25NTU |
Mai & Maiko | ≤ 2mg/L |
SS | ≤ 20mg/L |
Jimlar Iron | ≤ 1 MG/L |
Ci gaba da Rago Chlorine | ≤5pm |
COD | Ana ba da shawarar ≤ 500mg/L |
*Material na UF membrane shine polymer Organic filastik, dole ne babu wani kaushi na halitta a cikin ɗanyen ruwa.
Ma'aunin Aiki:
Matsakaicin Gudun Wanke Baya | 100-150L/m2.hr |
Mitar Wanke Baya | Kowane 30-60min. |
Duration Wanke | 30-60s |
Yawan CEB | 0-4 sau a rana |
Tsawon lokacin CEB | 5-10 min. |
Yawan CIP | Kowane watanni 1-3 |
Sinadaran Wanke: | |
Haifuwa | 15 ppm sodium Hypochlorite |
Wanke Gurbacewar Halitta | 0.2% sodium Hypochlorite + 0.1% sodium hydroxide |
Wanke Gurbacewar Inorganic | 1-2% Citric Acid/0.2% Hydrochloric Acid |
Abun Kaya:
Bangaren | Kayan abu |
Membrane | Gyaran PVDF |
Rufewa | Epoxy Resins |
Gidaje | Farashin UPVC |